banner
Home » Product > High Pressure Ring Blower
Product Categories

Compact Pressure Blowers

YongHeCheng Ring Blower Specifications Compact Pressure Blowers The impellers are mounted directly on the motor shaft for noncontact compression entirely without friction . Maximum operational reliability, even at high differential is ensured by the arrangement of the bearings outside the...

Send InquiryChat Now

QQ图片20171106105113.jpgYongHeCheng Ring Blower Specifications


Compact Pressure Blowers

image001.jpg

The impellers are mounted directly on the motor shaft for noncontact compression entirely without friction . Maximum  operational reliability, even at high differential is ensured by the arrangement of the bearings outside the compression chamber.

The gas it taken in though the inlet1.As it enters the side channel 2,the rotating impeller 3 imparts velocity to the gas in the direction of rotation. Centrifugal force in the impeller blades accelerates the gas outward and the pressure increase. Every rotation adds kinetic energy.

Resulting in the further increase of the pressure along the side channel. The side channel narrow at the rotor, sweeping the gas off the impeller blades and discharging it though the outlet silencer 4 where it exits the side channel blower.

Operating Principle:

image002.jpg

Numbering

Part name

Numbering

Part name

Numbering

Part name

Numbering

Part name

001

pump cover

011

base

021

washer

005-2

screw

002

impeller

012

screw

022

circlip

010-1

mesh enclosure

003

pump casing

013

pressure-plate

023

o-ring

010-2

soundproof spoge

004

rotator

014

screw

024

hand ring

010-3

screw

005

motor

015

fixing base

025

wrap ring

011-1

screw

006

motor cover

016

felt ring

001-1

screw

011-2

screw

007

fan

017

oil seal

001-2

screw

012-1

lock washer

008

fan cover

018

screw

004-1

flat key

1.jpg 1.jpg

009

paper pad

019

ware washer

004-2

flat key

1.jpg 1.jpg

010

muffle tube

020

oil seal

005-1

screw

1.jpg 1.jpg


Composition Chart:

image003.jpg

Demonstration of the type:

image004.jpg

Absolute Pressure:

Absolute pressure in vacuum(absolute pressure is zero)as the reference and the measured values obtained. So the pressure is greater than the reference value.

Gauge Pressure:

Gauge pressure is that measurement is higher than the standard atmospheric pressure value. The standard atmospheric for reference, so the actual measured value is larger than the reference value.

Vacuum Degree:

The vacuum is that measurement is lower than the standard atmospheric pressure value. Measurement benchmark is still the standard atmospheric pressure, so the actual measured value.

High pressure blower features advantages

*Improvement of traditional crafts, bearing front, increased stability.

*Using some of the imported parts, lengthen service life.

*The shell adopts the high quality aluminum alloy one –time die-casting molding, machining parts completed  in the cutting process, ensure the accuracy improvement of traditional technology.

*The design of the impeller through the accurate calculation of argumentation, the performance under the same power ratio similar products increased by 20%.

The performance advantages:

*100% oil free compressed gas, water ring vacuum pump, motor, all are the protection class IP55, class F insulation.

*Dual frequency(50/60HZ) and wide voltage can meet almost all regions of the world the voltage level, the external design of the bearing, can bear high working temperature, improves the reliability and service life.

*The introduction of variable frequency drive new concept, than the maximum performance can be driven by a common motor is improved to 300%, impeller and pump body seal forms the unique reduced pressure gas pressure loss in the process of compression.

*Pump casing, impeller die-casting molding, sturdiness and durability, excellent heat dissipation, imported Japan, Germany, precision machine tool cutting, ensure the accuracy and quality, air pump through the surface of protective paint processing.

*Products through the strict mechanical, electrical performance test, simulation demonstrate the use of PROE,UG,CAD and other computer aided design software and motion.




Hot Tags: compact pressure blowers, China, manufacturers, factory, made in China

Inquiry