banner
Home » Product > Centrifugal Fans with Forward Curved Blades
Product Categories

Dual Inlet Forward Curved Blower

Centrifugal Fans with Dual inlet Forward Curved Blades (EDK Series ) Products Description : EDK Series of Air-Conditioner Centrifugal Fans is a new type of fans that adopts double inlet air type, with forward multiwing impeller and belt drive.The charasteristics are big CFM, mezzo pressure, high...

Send InquiryChat Now

Centrifugal Fans with Dual inlet Forward Curved Blades (EDK Series )

Products Description

EDK Series of Air-Conditioner Centrifugal Fans is a new type of fans that adopts double  inlet air type, with forward multiwing impeller and belt drive.The charasteristics  are big CFM, mezzo pressure, high efficienvy, noise is decreased a lot  compared with other fanss with same CFM and pressure,technical function  reaches and overreaches same kind of products of overseas.Whole serie fanss  NO. from #2.5 to #10, totally 13 kinds,CFM is from 1500m3/h to 110000m3/h. It  is the ideal mating product of the central air-conditioning unit-counter and  other air-conditioner, deaning, ventilation products .Fans  performance on catalogue is according to GB1236-2000.

Features

1.Fan Shell

It can  made by Galvanized steel plate or Cold-Rolled steel plate,fans side lives up  to aerodynamical principle.Fans have protective outer frame , safe and  reliable.Volute and side connection uses unite forming system ,cases are made  of rollsteelsheets , which surface are electrostatic powder spraying, smooth  ,flat and beautiful.

2.impeller

EDK Series  of Air-Conditioner Centrifugal Fanss use specific shape forward multiwing  impeller, and adopt illustration rivetting for impeller cover and disc.Impeller,  cover and disc are made of hotdipping steelwhich is colded precessed.Every  fans are adjusted dynamic balance according to JB/T9070, precision is G4.0.

3.inlet

Inlet of  EDK Series of Air-Conditioner Centrifugal Fanss use one time punching and bending  with hotdipping steel or rollsteelsheets, install to fans sides,cross section  that is paralleld with axle direction,air fluency, little loss.

4. Axle

EDK Series  of Air-Conditioner Centrifugal Fans mail axles use 45 fine Carbon  Construction Steel, are made by thermal refining with fine  process.After installation, surface of main axles are finished with antirust  and anti-corrosion, that can protect main axle

5.outer frame

EDK Series  of Air-Conditioner Centrifugal Fans outer frames below 4.5# can use zinc  coating steel with punching and tox rivetting.Over 5.0#, frames can use  Rolled Steel Section with weldding, surface is finished by paiting.

6.Bearing

EDK Series  of Air-Conditioner Centrifugal Fans bearings, below 4.5# can use  totally-enclosed bearing,vibrating loop wraps bearing, and fasten to side of  fans by bolt.Above 5.0# can use UCP bearing with base,fasten to frame, every  bearing base has hole for adding lubricant.

7.belt pulley,belt

EDK Series of Air-Conditioner Centrifugal Fanss use tapesleeve type lock belt pulley,  easy to take down.Belt pulley can be grown or exotic accordingly



Hot Tags: dual inlet forward curved blower, China, manufacturers, factory, made in China

Inquiry