DDF/YDF SeriesAir Conditionning Centrifugal Fan Products Description ： DDF/YDF Series of outer rotor-low noise Centrifugal Fans is a new type of fans that adopts double inlet air type, with forward multiwing impeller and belt drive, it also uses most advanced design and aerodynamical principle...Send InquiryChat Now
DDF/YDF SeriesAir Conditionning Centrifugal Fan
DDF/YDF Series of outer rotor-low noise Centrifugal Fans is a new type of fans that adopts double inlet air type, with forward multiwing impeller and belt drive, it also uses most advanced design and aerodynamical principle .The charasteristics are small volume, compact structure, easy to assemble, big flow,low noise, high efficency. Whole serie fanss NO. from 2.0A to 5.0B, totally 32 kinds,CFM is from 1000m3/h to 20000m3/h. It is the ideal mating product of the central air-conditioning unit-counter and other air-conditioner, deaning, ventilation products .Fans performance on catalogue is according to GB1236-2000.
DDF Series of Fans case can made of hotdipping steel or rollsteelsheets,fans side lives up to aerodynamical principle, inlet hose is stretched directly from side. Volute and side connection uses unite forming system, not electrical welding or spot welding, which can avoid oxidation. Fans side has the installation hole of foot, that is for customer to change outlet direction if need.All the holes are filled by plastic when leaving factory.
DDF Series of Fans use specific shape forward multiwing impeller, and adopt illustration rivetting for impeller cover and disc.Impeller, cover and disc are made of hotdipping steelwhich is colded precessed.Every fans are adjusted dynamic balance according to JB/T9070, precision is G4.0. velocity of vibration is below 1.0mm/s, impellers run steadily.
Inlet hose of DDF Series of Fanss use one time punching and bending with fine steel, install to fans sides,cross section that is paralleld with axle direction,air fluency, little loss.
Electric motor of DDF Series of Fanss use phase asynchronous outer rotor low noise motor,impellers and motors are connected together with bolt, and install into enclosure.
Foot stands of DDF series of fans are made of zinc coating steel with punching, install foot stands to sides of enclosure with bolt