banner
Home » Product > Centrifugal Fan > Low and Medium Pressure Centrifugal Fan
Product Categories

Induced Draft Fan

Induced Draft Fan YHC 4-68 Centrifugal Fan (Belt Drive) YHC-4-68 is suitable for indoor ventilation in general factories and large buildings; it can be used as input gas or output gas. Reasonable structure, large flow, low noise, easy installation Can also be used for gas flow, purification, gas...

Send InquiryChat Now

Induced Draft Fan

YHC 4-68 Centrifugal Fan (Belt Drive)

YHC-4-68 is suitable for indoor ventilation in general factories and large buildings; it can be used as input gas or output gas. Reasonable structure, large flow, low noise, easy installation

Can also be used for gas flow, purification, gas transmission does not exceed 80 °C, harmless to the human body, non-corrosive gases to steel materials, gases do not allow sticky substances, dust and hard particles contained not more than 150mg / m3 .

Centrifugal production:

The fan consists of a shell, a blade, an air inlet, and the like. Install the motor. This fan style may or may not have a chassis. Standing at the position where the motor and fan are facing the fan inlet, the chassis range is 0 to 270 degrees with a space of 45. The fan has no buttons, either clockwise or counterclockwise.

structure:

1, shell: Q235 steel plate welding, removable after starting, built-in shell. Construction can easily remove dust from the blades.

2. Blade: Includes 12 round blades on the back blade, curved front shell and plate, and rear shell. The power balance corrects the fan's air flow, large flow, high efficiency, and stable operation.

3. According to the explosion-proof working conditions, the air inlet can be installed below or on the side.


Hot Tags: induced draft fan, China, manufacturers, factory, made in China

Inquiry